|
Auto recerse tapping & Core drilling machine |
 |
เครื่องต๊าป ฐานแม่เหล็ก & สว่านฐานแม่เหล็ก (2in1)
MODEL:TP 2000
| Model |
TP2000 |
| Power input |
1100W |
| Voltage |
110-120v 50-60Hz 220-240v 50-60Hz |
| Drilling mode No/full load min |
550/330 |
| Tapping mode No/full load min |
150/90 |
| Spindle coupling |
31mm(bilz no.2) |
| Annular cutter arbor |
Set screw type.19.05mm Weldon shank |
| Annular cutters |
Dia .35mm*50mm(1-3/8″*2″) |
| Taps |
20mm*40mm(13/16″*1-9/16″) |
| Twist drills |
13mm*150mm(1/2″*6″) |
| Magnetic adhesion |
15000N(3.372 lb-f) |
| Net weight |
13.7kg(30.8Lbs) |
STANDARD ACCESSORIES
- Universal tap chuck
- Wrench M8
- 2.5mm L-HEX key
- 4mm L-HEX key
- Drill chuck arbor
- 1/2 ″chuck and chuck key
- Annular cutter arbor 3/4″(19.05mm) Weldon shank
- Coolant tank kit
- Chip guard kit
- Safety chain
- Blow molded case
OPTIONAL ACCESSIRIES
- Other sizes of clamp collects
- Overload protection
Annular
pilot pin
magnetic chip collector
large range bliz no.2
clamp collects (see p.23)
annular cutter arbor
(annular cutter and pilot Pin not included)
drill chuck arbor(twist drill not included)
- large range clamp collet (not included)
- universal tap chuck
- tap(not included)
- coolant feed spring and seal
- pillot pin(not included)
- annular cutter arbor3/4″(19.05mm) Weldon shank)
- annular cutter (not included)
- 1/2 ″twist drill chuck
- drill chuck arbor 10.quick release collar
- TP2000 annular cutter arbor
Arbor for 3/4″ (19.05mm) Weldon shank annular cutters
Part number 0202-0058-00907-001
- TP2000 drill chuck arbor
Arbor for 1/2 ″chuck (1/2 ″-20UNF)
Part number 0202-0059-00907-001
(Patented)
|